Energy & Sustainability
Battery Storage Growth Creates New IoT Monitoring Opportunities in Arizona
Published by IOT Arizona Research & Editorial Team

- A Lesson From Surprise, 2019
- The Monitoring Layers of a Storage System
- Why Arizona Heat Matters
- Early Warning: Off-Gas Detection
- Performance and Degradation Analytics
- Dispatch: Delivering Power When It Counts
- Behind-the-Meter Storage
- Working With First Responders
- Cybersecurity
- An Illustrative Summer Week at a Storage Site
- Augmentation and End of Life
- Standards and Codes
- Opportunities for Arizona IoT Firms
- Questions for Storage Owners
- Looking Ahead
Arizona added more than 6.2 gigawatt-hours of new battery storage in the second quarter of 2026, the strongest quarter on record for any single state, according to the Solar Energy Industries Association and Benchmark Mineral Intelligence. Arizona accounted for 27 percent of U.S. deployments in 2026 and overtook Texas in new capacity during the first half of the year. Salt River Project alone reports more than 1.6 gigawatts of battery storage, and Arizona hosts some of the largest storage projects in the country, including the Papago Storage facility in Tonopah.
Storage at that scale creates a monitoring challenge, and therefore an opportunity. A battery energy storage system is thousands of cells, each needing to stay within narrow limits of temperature, voltage and current, housed in containers sitting in the Arizona sun and expected to deliver power reliably on the hottest evenings of the year. Arizona also carries an early lesson about what happens when things go wrong. This article looks at the monitoring layers storage requires, why Arizona conditions raise the stakes and where IoT firms can contribute.
A Lesson From Surprise, 2019
In April 2019, an explosion at APS's McMicken battery storage facility in Surprise injured several firefighters responding to the site. Investigations found that a cell failure led to thermal runaway and that flammable gases accumulated inside the enclosure before the explosion. The event shaped storage safety practices across the industry, including better gas detection, ventilation and explosion control, closer coordination with first responders and the wider adoption of fire codes and standards such as NFPA 855.
Today's large Arizona projects reflect those lessons. Developers such as Plus Power have described consulting first responders in host communities, and modern systems combine cell monitoring, gas detection and fire suppression. Monitoring sits at the center of that safety approach.
The Monitoring Layers of a Storage System
| Layer | What Is Monitored | Purpose |
|---|---|---|
| Cell and module | Voltage, temperature, current, internal resistance | Detect cell imbalance, degradation and early signs of failure |
| Battery management system | State of charge, state of health, balancing, protection limits | Keep cells within safe operating limits |
| Thermal management | Container HVAC or liquid cooling, ambient and internal temperatures | Prevent overheating and slow degradation |
| Gas and fire detection | Off-gas sensors, smoke, heat, suppression status | Catch thermal runaway early and protect responders |
| Power conversion | Inverter output, faults, temperature | Reliable charging and discharging |
| Site and grid | Dispatch commands, metering, power quality, security | Deliver power when the utility needs it |
Why Arizona Heat Matters
Lithium-ion batteries age faster at high temperatures, and they are asked to work hardest during Arizona's hottest evenings, when demand peaks. Containers in direct sun require powerful cooling, which itself consumes energy. Monitoring that links cell temperatures, cooling performance and ambient conditions helps operators:
- Detect cooling failures before cells overheat.
- Understand how heat affects degradation and warranty compliance.
- Plan maintenance of HVAC and liquid cooling systems before summer.
- Account for cooling energy when calculating round-trip efficiency.
Dust adds another layer: air filters and condenser coils on cooling systems clog after haboobs, reducing cooling capacity at the worst possible time.
Early Warning: Off-Gas Detection
Cells approaching thermal runaway often release gases before visible smoke or flames. Off-gas sensors can detect these emissions early, giving systems time to isolate affected modules and alert operators. Combined with cell temperature and voltage trends, this layered detection provides the best chance of stopping a failure before it spreads.
Performance and Degradation Analytics
Beyond safety, monitoring determines whether a storage project delivers its expected value. Operators track state of health over time, compare actual capacity with warranted capacity, analyze how dispatch patterns affect aging and identify weak modules for replacement. Detailed data supports warranty claims and informs decisions about augmenting capacity as batteries age. For owners, these analytics directly affect project economics.
Dispatch: Delivering Power When It Counts
SRP has described contracts that give it control over dispatch of storage to reduce peak demand. Effective dispatch depends on accurate state of charge, reliable communications and forecasts of demand and solar output. A battery that runs out of charge thirty minutes before the true evening peak delivers far less value. Our article on how Arizona solar is becoming connected energy systems explains how storage pairs with solar.
Monitoring also supports participation in markets and programs that reward storage for fast response, where proving performance with accurate data affects payments.
Behind-the-Meter Storage
Storage is also growing at homes, businesses, data centers and factories. Commercial batteries can cut demand charges by discharging during peaks, provide backup power and support solar self-consumption. They need the same monitoring discipline at smaller scale: temperature, state of charge, faults and safety alarms, plus integration with building energy systems. Our data center energy monitoring guide discusses batteries in large facilities.
Working With First Responders
Fire departments need information about storage sites before and during incidents: layouts, chemistries, shutdown procedures and live data on conditions inside enclosures. Some operators provide remote access to monitoring data for responders or install external displays. Pre-incident planning and regular drills, informed by the Surprise experience, make responses safer.
Clear data sharing agreements make these arrangements work during emergencies, when time matters most and responders need reliable, current information.
Cybersecurity
Storage systems can charge or discharge large amounts of power on command, which makes them part of grid-critical infrastructure. Battery management systems, plant controllers and remote monitoring platforms must be segmented, authenticated and patched. Vendor remote access should be controlled and logged. Our IoT security guide outlines the essentials.
An Illustrative Summer Week at a Storage Site
Consider a 250 megawatt storage facility in the West Valley during a heat wave. Each afternoon, the battery charges from midday solar while container cooling works hard against outdoor temperatures above 115 degrees. Monitoring shows one container's cooling unit struggling, with cell temperatures creeping higher than neighboring containers. A technician finds a clogged condenser coil from a recent dust storm and cleans it before evening dispatch. Each evening, the utility calls on the battery during the peak, and state-of-charge forecasting ensures energy lasts through the critical hours. Late in the week, an off-gas sensor reports a brief reading in one module; the system isolates the module and alerts operators, who inspect and replace it. The scenario is illustrative, but it reflects the layered monitoring modern storage depends on.
Augmentation and End of Life
Batteries lose capacity over time. Many storage projects plan to add new modules, called augmentation, to maintain contracted capacity. Monitoring data guides when and how much to augment. Eventually, batteries reach end of life and must be recycled or repurposed. Detailed records of each module's history support safe handling, second-life applications and recycling. As Arizona's early storage fleet ages over the coming decade, these lifecycle decisions will become routine, and they will depend on data collected from the first day of operation.
Standards and Codes
Storage projects must meet fire and electrical codes, often including NFPA 855 and UL 9540 and its related test method UL 9540A for thermal runaway fire propagation. Local fire departments and building officials apply these requirements, which typically include detection, suppression, ventilation and emergency response planning. Monitoring systems help demonstrate ongoing compliance, and good documentation simplifies inspections and permitting for future expansions.
Opportunities for Arizona IoT Firms
- Installation and maintenance of gas, thermal and environmental sensors at storage sites.
- HVAC and cooling monitoring tailored to desert conditions.
- Degradation analytics and warranty support for owners.
- Integration of storage data with utility and building systems.
- First responder data access and training support.
- OT cybersecurity for storage and solar-plus-storage plants.
- Commercial behind-the-meter storage monitoring and controls.
Questions for Storage Owners
- Do we monitor at cell level, and how quickly do alerts reach someone who can act?
- Are off-gas detection and fire suppression tested regularly?
- Is cooling performance tracked against cell temperatures, especially after dust storms?
- Can we prove capacity and degradation for warranty purposes?
- Have local fire departments reviewed our site plans and data access?
Answering them honestly before each summer, with data in hand, turns safety and performance into a routine rather than a reaction.
Looking Ahead
Arizona's storage boom is likely to continue as utilities retire coal, add solar and prepare for rising peak demand from data centers and manufacturing. Each new gigawatt-hour adds thousands of cells, containers and controllers that must be monitored for safety, performance and dispatch. The state that learned a hard lesson in Surprise in 2019 is now one of the largest storage markets in the country, and its monitoring practices will help determine whether that growth stays safe, reliable and economical.
Our guide to cutting peak demand explains how businesses benefit from storage, and our sensor buyer's guide covers heat-rated hardware. Find energy and storage partners in the IoT Arizona company directory, including energy and sustainability providers in Phoenix. Browse more of our Energy and Sustainability coverage.
Frequently asked questions
Related articles
Energy & Sustainability
Energy & Sustainability
IoT Building Energy Management in Arizona: Running Efficiency as a Continuous Program, Not a Rebate Project
Energy & Sustainability
IoT Energy Monitoring for Arizona Data Centers: Metering, PUE and Demand in a Changing Rate Landscape
Energy & Sustainability
